Any condition, any size
Sell a 333 kVA Transformer in Ohio
Padmount and dry-type units at this rating bought across Ohio, from pole cans to padmounts, with the freight arranged.
What we buy
What we buy here
A 333 kVA transformer is usually about about 2,600 pounds wet, which decides whether a telehandler will do or a crane is needed. If the weight is unknown, the tank dimensions and the radiator count get a buyer within a few percent.
| Wet weight | about 2,600 pounds |
|---|---|
| Typical use | a utility distribution point or a mid-size plant |
| Common form | three-phase padmount |
| Why sellers call | The 333 kVA size is a utility standard rather than an industrial one, and the units are usually well maintained. |
Who we buy from
Six kinds of seller, one desk
- Recyclers
- Electrical contractors
- Equipment dealers
- End users
- Demo contractors
- Distributors
Fast offers
A nameplate photo is usually enough to price a unit the same day.
Dedicated logistics
We arrange the crane, the permits and the flatbed, not you.
No broker fees
You are dealing with the buyer, so nothing is shaved off the offer.
How it works
Six steps from your yard to the money
- 01
Take pictures
The nameplate, the cabinet interior and the tank in daylight. Three photographs are usually enough to place a unit in the right class and the right price band.
- 02
Send them to us
The form on this page, a text or an email all reach the same desk. Include the city, the access and any deadline the site is working to.
- 03
Review the offer
A buyer reads the photographs, asks one or two questions and sends a written offer with the assumptions stated, so nothing changes on the day.
- 04
We schedule freight
Crane, flatbed and permits are booked around your access. You get a date and a window, and we carry the cost of getting it right.
- 05
Testing on arrival
Winding resistance, megger and turns ratio, plus oil analysis where the unit is liquid filled. The results decide the final number, and you see them.
- 06
Get paid
Payment is released on the agreed terms once the unit is received and tested, by check or ACH. No retention, no sixty-day terms.
What we handle for you
The parts sellers dread, done for you
Rigging
Crane and forklift arranged around your access, not the other way round.
Oil containment
Bunds, absorbent and disposal handled before the unit moves.
Bill of sale
A clean title document for your records, signed on collection.
PCB paperwork
Pre-1979 units get the testing and the manifest they need.
Rating
What a 333 kVA transformer is used for
A 333 kVA transformer being replaced has usually been outgrown rather than worn out. A dry-type with dust on the windings has been in a room nobody cleaned, and the dust holds moisture.
A seized tap link turns a five-minute voltage change into a tank opening, which is worth knowing before the sale. A furnace or kiln unit runs hot for days and then cools, which is harder on insulation than a steady load.
Size, weight and handling
A lowboy is the right trailer for a heavy unit with a low centre of gravity and a long approach. A mezzanine unit usually comes out in pieces or through a window, and both options need planning.
A lift that starts level ends level, and a lift that starts crooked rarely does. A bridge rating can turn a twenty-mile drive into a sixty-mile one, and the permit names the route for that reason.
What we check on a 333 kVA unit
Dents in a radiator bank matter more than dents in a door, because a crushed fin is a cooling problem that only shows up under load. A drain valve that will not open is a small problem that becomes a large one on pickup day.
A screened unit that passes still needs the full suite before it goes back into service. A bushing, a gasket and an oil processing are the three cheapest ways to raise a number.
What it is worth
A site visit costs the buyer a morning and saves both sides a misunderstanding, which is why it is free to the seller. A rare rating in good condition still has a small market, and a small market moves slowly.
Condition grading exists so that two people can discuss a number without arguing about adjectives. The buyer's number is a purchase figure rather than a valuation, which is why it does not move once agreed.
Common questions
Other ratings we buy
Get started
Get an offer in minutes
Five fields and a phone number is all we need to start. We reply the same business day, and a firm number follows the nameplate photo.
(614) 715-3047or send the form and we will call you.
Questions
What sellers ask before they call
Equipment types
How much does a 333 kVA transformer weigh?
What you send stays with the buying desk, and we do not publish your plant, your nameplate or your deadline anywhere. A 500 kVA padmount runs a few thousand pounds wet, a substation unit can run into six figures, and that difference decides the whole plan. Remanufacturing keeps the footprint, and the footprint is often the reason the unit cannot simply be replaced.
Service area
Do you buy a single 333 kVA unit?
If a unit is scrap, we will tell you it is scrap instead of dressing it up as something better. Nothing sits in our queue for a week waiting for approval, because the buyer who quotes you also books the crew. The question that decides most purchases is not what the unit is but where it has to go next.
Payment
What if the 333 kVA unit has failed?
Sellers inside a closure or a bankruptcy need discretion as much as speed, and both are available here. The decision between recovery and teardown on a three-phase padmount usually comes down to the oil test and the winding resistance. A site visit answers in twenty minutes what a week of messages cannot.