Any condition, any size
Sell a 12500 kVA Transformer in Ohio
Padmount and dry-type units at this rating bought across Ohio, from pole cans to padmounts, with the freight arranged.
What we buy
What we buy here
The step from 12500 kVA to the next size up changes the trailer more than it changes the paperwork. A 500 kVA padmount runs a few thousand pounds wet, a substation unit can run into six figures, and that difference decides the whole plan.
| Wet weight | about 65,000 pounds |
|---|---|
| Typical use | a utility substation or a generating site |
| Common form | substation |
| Why sellers call | Twelve and a half MVA units are bought by utilities and large plants, and the test record decides the outcome. |
Who we buy from
Six kinds of seller, one desk
- Recyclers
- Electrical contractors
- Equipment dealers
- End users
- Demo contractors
- Distributors
Fast offers
A nameplate photo is usually enough to price a unit the same day.
Dedicated logistics
We arrange the crane, the permits and the flatbed, not you.
No broker fees
You are dealing with the buyer, so nothing is shaved off the offer.
How it works
Six steps from your yard to the money
- 01
Take pictures
The nameplate, the cabinet interior and the tank in daylight. Three photographs are usually enough to place a unit in the right class and the right price band.
- 02
Send them to us
The form on this page, a text or an email all reach the same desk. Include the city, the access and any deadline the site is working to.
- 03
Review the offer
A buyer reads the photographs, asks one or two questions and sends a written offer with the assumptions stated, so nothing changes on the day.
- 04
We schedule freight
Crane, flatbed and permits are booked around your access. You get a date and a window, and we carry the cost of getting it right.
- 05
Testing on arrival
Winding resistance, megger and turns ratio, plus oil analysis where the unit is liquid filled. The results decide the final number, and you see them.
- 06
Get paid
Payment is released on the agreed terms once the unit is received and tested, by check or ACH. No retention, no sixty-day terms.
What we handle for you
The parts sellers dread, done for you
Rigging
Crane and forklift arranged around your access, not the other way round.
Oil containment
Bunds, absorbent and disposal handled before the unit moves.
Bill of sale
A clean title document for your records, signed on collection.
PCB paperwork
Pre-1979 units get the testing and the manifest they need.
Rating
What a 12500 kVA transformer is used for
A 12500 kVA unit usually serves a load measured in hundreds of horsepower rather than thousands. Radiator fins that have been crushed in transit lose capacity permanently and do not announce it.
A bushing replaced with the wrong length changes the clearance, which is a safety matter rather than a cosmetic one. A unit with four bushings on the secondary is a different animal from one with three.
Size, weight and handling
A pad cleared and swept afterwards is the difference between a buyer who is called again and one who is not. A schedule that assumes the gate is open will discover otherwise at seven in the morning.
A second pair of eyes on the access route is worth more than a second opinion on the paint. A river terminal changes the arithmetic on a very large unit, because barge transport avoids the bridges.
What we check on a 12500 kVA unit
We look for evidence of overload, because a unit that ran hot for years shows it in the paint on the tank and the colour of the oil. A three-winding unit needs a test sheet rather than a description, because the tertiary changes everything.
A dark sample is not automatically a failed sample, and a clear one is not automatically a good one. A buyer who reads the lab report properly can price a unit without seeing it, which is why the report matters.
What it is worth
A failed unit with a clean tank is a rebuild candidate, and a rebuild candidate is not scrap. A buyer who explains a deduction is easier to trust than one who simply reduces the figure.
Common questions
Other ratings we buy
Get started
Get an offer in minutes
Five fields and a phone number is all we need to start. We reply the same business day, and a firm number follows the nameplate photo.
(614) 715-3047or send the form and we will call you.
Questions
What sellers ask before they call
Equipment types
How much does a 12500 kVA transformer weigh?
The process runs on one call and one look: describe the unit, send the tag, agree a number, and put a date on the truck. Weight is the first logistics question, and the figure on the tag is not the figure the crane needs, because oil, bushings and skid weight all add up. A buyer who has seen the site will always beat a buyer who has only seen a form, which is why the visit is free.
Service area
Do you buy a single 12500 kVA unit?
A buyer reads the tag, checks whatever oil history exists, and says what the unit is worth as it stands rather than what it might be worth rebuilt. If the building changes hands at the end of the month, say so at the start and the schedule gets built backwards from that date. A seller should be able to tell, from one phone call, whether the buyer has done this before.
Payment
What if the 12500 kVA unit has failed?
You are paid when the unit leaves the pad, not thirty days after it arrives somewhere else. Teardown is not failure, since a twenty-ton unit that cannot be reused is still a significant amount of metal. A short list of photographs covers the cabinet, the tag, the bushings and the access, and nothing else is needed at the start.